Trenchless sewer repair and replacement in Los Angeles is effective and convenient, but it is also quite expensive. So before you opt for this kind of sewer repair, it’s vital to make sure you really need it!
Identifying Sewer Problems
The first step to deciding whether or not you need trenchless sewer repair and replacement in Los Angeles is figuring out what is causing your plumbing problems. Often, the cause of a clogged drain is very close to the drain—often in the sink trap or in the pipe a few feet from the drain. These types of clogs can be accessed right from the drain and easily removed. However, when your clogs or blockages occur further along in your pipes, you move into sewer repair territory.
For example, you might have a snarl of tree roots blocking your pipe in the middle of the yard, or you might have a burst pipe or a clogged sewer drain. A professional plumber and drain cleaner will be able to pinpoint the source of your problem using in-line sewer cameras and then recommend a method for fixing it.
Choosing Trenchless Sewer Repair
Problems in your sewer line can be fixed in one of two ways: digging up the affected pipe or pipe sections, or replacing them using trenchless sewer repair. The solution you choose will depend on your budget as well as on the location of the problem and any aesthetic concerns you may have. You will have to balance the high cost of trenchless sewer repair against the damages to surrounding structures that it can prevent. For example, if you have a really nice deck or patio located directly over the problem, you won’t want to dig up the pipe. However, if the problem is beneath a patch of grass or even a corner of your driveway, it will probably be easy enough to just dig up the pipe and make the repair.
Types of Trenchless Sewer Repair and Replacement in Los Angeles
Trenchless sewer repair can be accomplished by bursting and replacing the current pipe, or by running a liner through it.
Pipe bursting is normally used for extremely damaged pipes. Two access points will be dug, and then a cable will be run through the damaged pipe section. The cable drags along a new section of pipe behind it, which destroys the old pipe as it replaces it.
Pipe lining is often used for smaller problems. A resin-coated liner will be inserted into the damaged pipe and then inflated. As the resin cures, the liner solidifies, becoming an effective, seamless replacement. The downside to pipe lining is that it decreases the diameter of the pipe slightly.
Once you understand the basics, the best way to tell if you need trenchless sewer repair is to call the pros and ask them to give you an estimate.
